Digitax HD

Pulse Duty Servo Drives

Control Techniques’ servo products deliver high performance combined with maximum flexibility. The drives can connect to a wide range of motion controllers through I/O or dedicated

communication networks such as EtherCAT, EtherNet/IP, and PROFINET. Alternatively, these drives can use their integrated motion controller to take control of the automation system.

To optimize performance, Control Techniques servo drives and servo motors are segmented by the duty required for the application:

Pulse Duty Servo Drives – Digitax HD

High dynamic applications requiring hard accelerations and decelerations. Examples include pick-and-place, flying shear and other cut-to-length machines. These applications are characterized by high peak (e.g. 300% overload) and moderate RMS torque.

Continuous Duty Servo Drives – Unidrive M700

High precision over an extended duration requiring lower acceleration and deceleration rates. Examples include printing and winding and labeling. These applications are characterized by moderate peak and high RMS torque.

SKU: N/A

Categories: Servo Partners, Strategic Partners

Minimum size, maximum performance

The Digitax HD servo drive series extends the Unidrive M range with maximum servo performance in a minimum size package. Optimized for high-dynamic applications, Digitax HD provides the flexibility of both standalone and modular configurations. The drive offers full servo control plus open loop permanent magnet motor and induction motor control across four functionality levels: EtherCAT, MCi machine control, Ethernet and the flexible Base servo drive.

Reduce cost with small servo drives

Minimal footprint and exceptional power density make Digitax HD one of the smallest servo drives on the market today. This means that you can build the most compact cabinets possible.

Drive width of only 1.6 inches (40 mm)
Reduce cabinet height with UltraFlow™ technology which dissipates heat directly outside of the cabinet
Install Digitax HD in a cabinet just 200mm deep

Reduce cost and maximize your floor space

Boost throughput with maximum motion control

Optimized for high-dynamic applications and with high speed control loops, Digitax HD is one of the best performing servo drives on the market today. This means maximum throughput and product quality from your machines.

300% peak current performance pulse-duty overload
Optimized control loops for high dynamic performance
Up to 16 kHz switching frequency

Rapid installation and commissioning from standalone to a modular servo system

Digitax HD servo series can be used standalone and is also fast and easy to set up as a modular system.

Single AC input, 24 V and communication links, and common DC bus
DIN rail alignment, single cable technology and easy access pluggable connectors
Fast programming and commissioning PC tools

Control Techniques’ servo products deliver high performance combined with maximum flexibility. The drives can connect to a wide range of motion controllers through I/O or dedicated

communication networks such as EtherCAT, EtherNet/IP, and PROFINET. Alternatively, these drives can use their integrated motion controller to take control of the automation system.

To optimize performance, Control Techniques servo drives and servo motors are segmented by the duty required for the application:

Pulse Duty Servo Drives – Digitax HD

High dynamic applications requiring hard accelerations and decelerations. Examples include pick-and-place, flying shear and other cut-to-length machines. These applications are characterized by high peak (e.g. 300% overload) and moderate RMS torque.

Continuous Duty Servo Drives – Unidrive M700

High precision over an extended duration requiring lower acceleration and deceleration rates. Examples include printing and winding and labeling. These applications are characterized by moderate peak and high RMS torque.

Application Flexibility

Digitax HD

Pulse Duty Servo Drives

Control Techniques’ servo products deliver high performance combined with maximum flexibility. The drives can connect to a wide range of motion controllers through I/O or dedicated

To optimize performance, Control Techniques servo drives and servo motors are segmented by the duty required for the application:

Pulse Duty Servo Drives – Digitax HD

High dynamic applications requiring hard accelerations and decelerations. Examples include pick-and-place, flying shear and other cut-to-length machines. These applications are characterized by high peak (e.g. 300% overload) and moderate RMS torque.

Continuous Duty Servo Drives – Unidrive M700

High precision over an extended duration requiring lower acceleration and deceleration rates. Examples include printing and winding and labeling. These applications are characterized by moderate peak and high RMS torque.

Minimum size, maximum performance

Reduce cost with small servo drives

Minimal footprint and exceptional power density make Digitax HD one of the smallest servo drives on the market today. This means that you can build the most compact cabinets possible.

Drive width of only 1.6 inches (40 mm)

Reduce cabinet height with UltraFlow™ technology which dissipates heat directly outside of the cabinet

Install Digitax HD in a cabinet just 200mm deep

Reduce cost and maximize your floor space

Boost throughput with maximum motion control

Optimized for high-dynamic applications and with high speed control loops, Digitax HD is one of the best performing servo drives on the market today. This means maximum throughput and product quality from your machines.

300% peak current performance pulse-duty overload

Optimized control loops for high dynamic performance

Up to 16 kHz switching frequency

Rapid installation and commissioning from standalone to a modular servo system

Digitax HD servo series can be used standalone and is also fast and easy to set up as a modular system.

Single AC input, 24 V and communication links, and common DC bus

DIN rail alignment, single cable technology and easy access pluggable connectors

Fast programming and commissioning PC tools

Control Techniques’ servo products deliver high performance combined with maximum flexibility. The drives can connect to a wide range of motion controllers through I/O or dedicated

To optimize performance, Control Techniques servo drives and servo motors are segmented by the duty required for the application:

Pulse Duty Servo Drives – Digitax HD

High dynamic applications requiring hard accelerations and decelerations. Examples include pick-and-place, flying shear and other cut-to-length machines. These applications are characterized by high peak (e.g. 300% overload) and moderate RMS torque.

Continuous Duty Servo Drives – Unidrive M700

High precision over an extended duration requiring lower acceleration and deceleration rates. Examples include printing and winding and labeling. These applications are characterized by moderate peak and high RMS torque.